The Quilters Select Ruler are the best ruler to date! A quilter will find this Square ruler a handy edition to the ruler collections for the blocks that are 6″ or smaller. A perfect ruler for squaring up small blocks or triangle blocks, see how here.
Non-slip
The first and best feature is the non-slip coating on the back that keeps it in place while you cut. No more skewed cuts when cutting across the width of the fabric.
Frosted
The non-slip coating creates a frosted look and adds a yellow tint. It helps the fabric print recede so it doesn’t get in the way of finding a line or a fabric edge.
Ruler Markings
The Quilters Select ruler measurements are in black with fine incremental lines for more precision in sub cuts. The edge measurements go both ways on every side. Each ruler has incremental inch lines with stacked numbers to show measurements from the right as well as the left. As a result, they are easier to use, either from right to left or left to right so you never have to think about the mark you need when cutting or marking. There are incremental measurement marks for 1/8, 1/4, 1/2 and 3/4 too.
Marks of Degree
Each ruler has at least one set of 3 different angle degrees, 30°, 45° and 60° on the Long rulers and in 2 places on the Square rulers.
The “TRICK”
For a demonstration of the rulers with Alex Anderson watch this video, at about 45 seconds is “the trick” an ‘ah-ha’ moment.
Once you try a Quilters Select Ruler you will want one in all your favorite sizes. I Have a Notion currently stocks the Long rulers in sizes 6×24 inch, 6×12 inch,3x12inch, and 3×18 inch. The Square rulers in sizes 18×18inch, 12.5×12.5 inch,8.5×8.5 inch, and the 5×5inch.
Now that all the blocks have been sewn, cut and pressed open, it was time to start squaring up and trimming the blocks. I used the 5 inch Quilter Select Ruler, the same one I used in the blog post about Using the Tools, when the squares were originally subcut from the fabric strips.
3 reasons to use Quilters Select Ruler for squaring up
Reason 1- picking it up
The 5″ square Quilters Select ruler is just the right size; since the blocks are to be squared at 4 1/2” and it is easily picked up and moved about with just one hand. As I get older I find that my hands do not want to work any harder than they have to.
Using the ruler with one hand
Reason 2- non-slip
The Quilters Select non-slip coating makes accurate cut easier. One of the things that often takes the joy out of creating is when my ruler slips. It makes me feel frustrated and inadequate, especially, when I have ruined a piece of fabric or a block because the ruler slipped. I have found that the coating on these rulers really helps them stay in place, especially when squaring up a block.
The non-slip coating is yellow and lends a frosted look to the ruler
Reason 3- squaring up made simple
One of the most helpful aspects of the Quilters Select Rulers is the angle guidelines (30°, 45°, and 60°) and most of the rulers have 2 sets of the angle guidelines. You can see (in the photo below), the first set of angle lines, where the blue meets the white and the second set at the bottom of the block in the white.
The 2 sets of Angle Lines on the Quilters Select ruler
Once, all the blocks were pressed, next came squaring up the half-square triangle blocks. To square up, I lined the 45°line up on the diagonal seam line, very close to the top edge of the square, and trimmed the first two sides, (the right side and the top). I then took ruler off; turned the block and trimmed the other two sides, by again lining up the 45° line on the diagonal seam and the 4 1/2 inch dashed lines on the 2 previously trimmed sides. There were 8 colors, plus the white and a bit of black, and each combination had 32 squares for a total of 256 half triangle blocks!
Pressed, trimmed and stacked half-square triangle blocks
A note about “The Trick”
I discovered while squaring up these blocks, that the ability to turn the ruler and the fabric together (the trick)only happens on the Quilters Select Mat. If using any other brand of mat that is not as smooth as the Quilters Select mat, (like the Olfa and Fiskars mats that seem to have a slightly rougher texture), “The Trick” doesn’t work. But I like the non-slip aspect of the ruler, more than the ability to turn the block or squaring up!!!
Designing the Quilt Top
After squaring up all the half-square triangle blocks, I took them to the design wall… Originally what little plan I had when I began this project, has almost come together. I chose the colors after going to QuiltCon 2019. I blogged here and here about the what I saw at Quiltcon. However, I was not happy with any of the experimental designs I played with on the design wall.
I played
4 possible ideas
and played a bit more
3 More possible ideas
But I finally landed on a design. I discovered, on Facebook, a subtle hourglass quilt created by a friend, (Betty Elliott), and thought “That’s IT!” An hourglass quilt. Isn’t it beautiful?
The inspiration quilt B Elliotts Hourglass Quilt
Next up the question of the borders. Do you plan everything before you start a project, or do you just start with a thought and grow from there? I think you can guess how I start… most of my projects… How do you start yours?
The Quilters Select Ruler are the best ruler to date! The quilters best friend for cutting a medium square, squaring up those medium size blocks or for squaring or blocking a quilt.
Non-slip
The first and best feature is the non-slip coating on the back that keeps it in place while you cut. No more skewed cuts when cutting across the width of the fabric.
Frosted
The non-slip coating creates a frosted look and adds a yellow tint. It helps the fabric print recede so it doesn’t get in the way of finding a line or a fabric edge.
Ruler Markings
The Quilters Select ruler measurements are in black with fine incremental lines for more precision in sub cuts. The edge measurements go both ways on every side. Each ruler has incremental inch lines with stacked numbers to show measurements from the right as well as the left. As a result, they are easier to use, either from right to left or left to right so you never have to think about the mark you need when cutting or marking. There are incremental measurement marks for 1/8, 1/4, 1/2 and 3/4 too.
Marks of Degree
Each ruler has at least one set of 3 different angle degrees, 30°, 45° and 60° on the Long rulers and in 2 places on the Square rulers.
The “TRICK”
For a demonstration of the rulers with Alex Anderson watch this video, at about 45 seconds is “the trick” an ‘ah-ha’ moment.
Once you try a Quilters Select Ruler you will want one in all your favorite sizes. I Have a Notion currently stocks the Long rulers in sizes 6×24 inch, 6×12 inch,3x12inch and 3×18 inch. The Square rulers in sizes 18×18inch, 12.5×12.5 inch,8.5×8.5 inch, and the 5×5inch.
